Ensure that all covers, access panels, screens, etc. are properly installed and secure before leaving the job
Inspect unit for proper operation
Inspect unit for steam and water leaks
Check controls for proper operation and calibration
Inspect steam control valve for leaks and proper operation
Inspect unit and piping insulation for condition
Inspect steam trap for proper operation
Check integrity of piping hangers
Open and inspect steam and water sides of the exchanger
Clean heat exchanger.
Clean surrounding area, record results and findings and report any needed repairs or operational adjustments.

Obtain and review manufacturer's instructions.  Follow manufacturer’s instructions or procedures if different to these instructions or procedures.
Disconnect, tag, and lock out electrical circuit.

Standard and Phillips head screw drivers-various sizes; Pliers-vise grip (2), slipjoint, needlenose, diagonal; cutting pliers, side cutters; Ball peen hammer; Hack saw and spare blades; 3/8' drive socket set and ratchet; Small set of Allen wrenches; Assorted center punches, drift punches, and steel chisel; 12' measuring tape; Crescent wrenches 4" to 8";  Open and box end wrenches ¼" to ¾"; File; Pipe wrenches to 14"; Small level and square; Pocket knife; Flashlights; Grease guns and oilers; Wire brush; Extension cord and inspection lights; Various cleaning tools - brushes, scrapers, etc; Emery cloth.
Consult the Material Safety Data Sheets (MSDS) for hazardous ingredients and proper personal protective equipment (PPE).
Gloves.