Check hang and swing for close fit. Doors must latch on normal closing cycle and have a neat fit.
Remove any obstructions that retard full swing or movement of door.
Test operation of panic hardware. Inspect door coordinates on pairs.
Inspect door for damage.
Clean surrounding area, record results and findings and report any needed repairs or operational adjustments.

The work required by this procedure may cause the activation of an alarm and/or a supervisory signal.
Obtain and review manufacturer's instructions. Follow manufacturer’s instructions or procedures if different to these instructions or procedures.

Standard and Phillips head screw drivers-various sizes; Pliers-vise grip (2), slipjoint, needlenose, diagonal; cutting pliers, side cutters; Ball peen hammer; Hack saw and spare blades; 3/8' drive socket set and ratchet; Small set of Allen wrenches; Assorted center punches, drift punches, and steel chisel; 12' measuring tape; Crescent wrenches 4" to 8"; Open and box end wrenches ¼" to ¾"; File; Pipe wrenches to 14"; Small level and square; Pocket knife; Flashlights; Grease guns and oilers; Wire brush; Extension cord and inspection lights; Various cleaning tools - brushes, scrapers, etc; Emery cloth.
Gloves.