Flush pit and pump out.
Check bail, floats, rods, and switches.  (Make sure float operates as designed.)
Inspect and lube motor, and pump (repack if needed).
Inspect check valves.
Clean surrounding area, record results and findings and report any needed repairs or operational adjustments.

Obtain and review manufacturer's instructions.  Follow manufacturer’s instructions or procedures if different to these instructions or procedures.
Strainer cleaning requires removal of pump unit and should be handled as a repair.
Excessive sediment and debris, not removed by flushing the pit should be handled on a project basis, and not considered under this guide.

Standard and Phillips head screw drivers-various sizes; Pliers-vise grip (2), slipjoint, needlenose, diagonal; cutting pliers, side cutters; Ball peen hammer; Hack saw and spare blades; 3/8' drive socket set and ratchet; Small set of Allen wrenches; Assorted center punches, drift punches, and steel chisel; 12' measuring tape; Crescent wrenches 4" to 8";  Open and box end wrenches ¼" to ¾"; File; Pipe wrenches to 14"; Small level and square; Pocket knife; Flashlights; Grease guns and oilers; Wire brush; Extension cord and inspection lights; Various cleaning tools - brushes, scrapers, etc; Emery cloth.
Pipe wrenches to 24"; Tubing cutters; Flaring tool; Small acetylene outfit; Packing tool kit and packing; ¾" socket set Crescent wrenches to 14"
Cleaning equipment and materials. 
Lubricants. 
Safety goggles.
Gloves.
Consult the MSDS for hazardous ingredients and proper PPE.