Controller - Clean with blower or vacuum.  Check switches, relays, timers, resistors, contacts, connections, fuses, and overload settings.  Replace worn parts and adjust for proper operation.
Brakes - Observe operation.  Inspect drum and shoe clearance, adjust if needed.  Lubricate pivot points and clean as necessary.
Hydraulics - Inspect oil level.  Check for excessive heat, noise, and leaks.  Lubricate in accordance with specifications.
Clean surrounding area, record results and findings and report any needed repairs or operational adjustments.

Obtain and review manufacturer's instructions.  Follow manufacturer’s instructions or procedures if different to these instructions or procedures.

Standard and Phillips head screw drivers-various sizes; Pliers-vise grip (2), slipjoint, needlenose, diagonal; cutting pliers, side cutters; Ball peen hammer; Hack saw and spare blades; 3/8' drive socket set and ratchet; Small set of Allen wrenches; Assorted center punches, drift punches, and steel chisel; 12' measuring tape; Crescent wrenches 4" to 8";  Open and box end wrenches ¼" to ¾"; File; Pipe wrenches to 14"; Small level and square; Pocket knife; Flashlights; Grease guns and oilers; Wire brush; Extension cord and inspection lights; Various cleaning tools - brushes, scrapers, etc; Emery cloth.
Cleaning equipment and materials. 
Lubricants
Barricades
Safety goggles.
Gloves.
Consult the Material Safety Data Sheets (MSDS) for hazardous ingredients and proper personal protective equipment (PPE).